DIE&FORM
© DIE&FORM ENGINEERING S.r.l. 2016
DIE&FORM ENGINEERING S.r.l. VIALE DEL PIAVE 60, 25123 Brescia ( BS ) - ITALY P.IVA 02942540176 TEL +39 030 336 7862
MELT SHOP

In line degassing and refining of molten Aluminum

The remelt facility equipment starts with the aluminium scrap preparation up to the casting of ingots, T bars, slabs and billets. Homogenizing lines, continuous or discontinuous, are also part of our scope of supply.

Scrap charging machines

The scrap charging machines enable to automatically load the melting furnaces with reduced charging times.

Top view of a two chamber furnace with EMP metal circulation

The double chamber furnace separates the melting furnace in two specific areas: one for the loading/preheating of scrap and the other for absorbing the heat. Melting of the charge is obtained mainly by the heat transformed by the overheated metal recirculated into the loading area by EMP pump.

Molten metal circulating pumps and stirrers

To reduce the melting times, the metal losses and consumption, the molten metal is circulated by means of mechanical pumps, inductors or stirrers.

Skimming machines

The skimming machines, running on rails, perform the automatic dedrossing with minimum operating time and melt loss.

Regenerative burners, oxygen burners and high velocity burners

The burners depending on application, can be high speed, regenerative or oxyfuel.

DC

semi-continuous

casting

machines

and

the

HOT

TOP

mould

table

to

cast

Aluminum

billets

and slabs

Complete DC casting units for the hot top casting of billets and slabs are the final step of the liquid metal cycle.
DIE&FORM
Privacy Policy
MELT SHOP

In line degassing and refining of molten Aluminum

The remelt facility equipment starts with the aluminium scrap preparation up to the casting of ingots, T bars, slabs and billets. Homogenizing lines, continuous or discontinuous, are also part of our scope of supply.

Scrap charging machines

The scrap charging machines enable to automatically load the melting furnaces with reduced charging times.

Top view of a two chamber furnace with EMP metal circulation

The double chamber furnace separates the melting furnace in two specific areas: one for the loading/preheating of scrap and the other for absorbing the heat. Melting of the charge is obtained mainly by the heat transformed by the overheated metal recirculated into the loading area by EMP pump.

Molten metal circulating pumps and stirrers

To reduce the melting times, the metal losses and consumption, the molten metal is circulated by means of mechanical pumps, inductors or stirrers.

Skimming machines

The skimming machines, running on rails, perform the automatic dedrossing with minimum operating time and melt loss.

Regenerative burners, oxygen burners and high velocity burners

The burners depending on application, can be high speed, regenerative or oxyfuel.

DC semi-continuous casting machines and the HOT TOP mould table to cast Aluminum billets and slabs

Complete DC casting units for the hot top casting of billets and slabs are the final step of the liquid metal cycle.
© DIE&FORM ENGINEERING S.r.l. 2016
DIE&FORM ENGINEERING S.r.l. VIALE DEL PIAVE 60, 25123 Brescia ( BS ) - ITALY P.IVA 02942540176 TEL +39 030 336 7862
Privacy Policy
DIE&FORM
MELT SHOP

In line degassing and refining of molten Aluminum

The remelt facility equipment starts with the aluminium scrap preparation up to the casting of ingots, T bars, slabs and billets. Homogenizing lines, continuous or discontinuous, are also part of our scope of supply.

Scrap charging machines

The scrap charging machines enable to automatically load the melting furnaces with reduced charging times.

Top view of a two chamber furnace with EMP metal circulation

The double chamber furnace separates the melting furnace in two specific areas: one for the loading/preheating of scrap and the other for absorbing the heat. Melting of the charge is obtained mainly by the heat transformed by the overheated metal recirculated into the loading area by EMP pump.

Molten metal circulating pumps and stirrers

To reduce the melting times, the metal losses and consumption, the molten metal is circulated by means of mechanical pumps, inductors or stirrers.

Skimming machines

The skimming machines, running on rails, perform the automatic dedrossing with minimum operating time and melt loss.

Regenerative burners, oxygen burners and high velocity burners

The burners depending on application, can be high speed, regenerative or oxyfuel.

DC

semi-continuous

casting

machines

and

the

HOT

TOP

mould

table to cast Aluminum billets and slabs

Complete DC casting units for the hot top casting of billets and slabs are the final step of the liquid metal cycle.
© DIE&FORM ENGINEERING S.r.l. 2016
DIE&FORM ENGINEERING S.r.l. VIALE DEL PIAVE 60, 25123 Brescia ( BS ) - ITALY P.IVA 02942540176 TEL +39 030 336 7862