© DIE&FORM ENGINEERING S.r.l. 2016
DIE&FORM
EXTRUSION

Direct and indirect extrusion

The upstream and downstream systems enable to handle both soft and hard aluminium alloys.

Gas fired aluminium log heaters with hot shear

The isothermal extrusion can be obtained by the combination of rapid log heaters and the billet taper heating by gas or induction.

Extrusion die ovens overhead type

The   state   of   the   art   of   dies   preheating   is   reached   by   the   use   of   an   overhead   multichamber   oven   loaded/unloaded   from   the   bottom   and with a nitrogen atmosphere.

Floor handling of baskets or by automatic cranes

The automatic handling of baskets can be performed either by driven rollers or chains or by an automatic crane. The combination of the two above methods is possible.
DIE&FORM ENGINEERING S.r.l. VIALE DEL PIAVE 60, 25123 Brescia ( BS ) - ITALY P.IVA 02942540176 TEL +39 030 336 7862
DIE&FORM
Privacy Policy
EXTRUSION

Direct and indirect extrusion

The upstream and downstream systems enable to handle both soft and hard aluminium alloys.

Gas fired aluminium log heaters with hot shear

The isothermal extrusion can be obtained by the combination of rapid log heaters and the billet taper heating by gas or induction.

Extrusion die ovens overhead type

The   state   of   the   art   of   dies   preheating   is   reached   by   the   use   of   an   overhead   multichamber   oven   loaded/unloaded   from   the   bottom   and   with   a   nitrogen atmosphere.

Floor handling of baskets or by automatic cranes

The automatic handling of baskets can be performed either by driven rollers or chains or by an automatic crane. The combination of the two above methods is possible.
© DIE&FORM ENGINEERING S.r.l. 2016
DIE&FORM ENGINEERING S.r.l. VIALE DEL PIAVE 60, 25123 Brescia ( BS ) - ITALY P.IVA 02942540176 TEL +39 030 336 7862
Privacy Policy
DIE&FORM
EXTRUSION

Direct and indirect extrusion

The   upstream   and   downstream   systems   enable   to   handle   both   soft   and   hard aluminium alloys.

Gas fired aluminium log heaters with hot shear

The    isothermal    extrusion    can    be    obtained    by    the    combination    of    rapid    log heaters and the billet taper heating by gas or induction.

Extrusion die ovens overhead type

The   state   of   the   art   of   dies   preheating   is   reached   by   the   use   of   an   overhead multichamber    oven    loaded/unloaded    from    the    bottom    and    with    a    nitrogen atmosphere.

Floor handling of baskets or by automatic cranes

The   automatic   handling   of   baskets   can   be   performed   either   by   driven   rollers   or chains or by an automatic crane. The combination of the two above methods is possible.
© DIE&FORM ENGINEERING S.r.l. 2016
DIE&FORM ENGINEERING S.r.l. VIALE DEL PIAVE 60, 25123 Brescia ( BS ) - ITALY P.IVA 02942540176 TEL +39 030 336 7862